Performance parts.

Skunk2 Pro Series Intake Manifold Honda B Series

Skunk2 Pro-Series Intake Manifold: Skunk2 Racing’s Pro-Series...

Skunk2 Pro Series Intake Manifold Honda B Series

Skunk2 Pro-Series Intake Manifold: Skunk2 Racing’s Pro-Series....

This is default featured slide 4 title

Go to Blogger edit html and find these sentences.Now replace these sentences with your own descriptions.

This is default featured slide 5 title

Go to Blogger edit html and find these sentences.Now replace these sentences with your own descriptions.

31 May 2013

5ZIGEN : Releases Econ + for Ft86 / BRZ

ECON+ (plus), and it is advanced version of grounding system.

Resulting to quicker response on all rpm, and of course torque drop is solved.

Econ + is increases voltage to ignition coil from 12V to about 16V at a constant level. Giving higher sparking on each coil leading to stronger torque which leads to increase of Horsepower .

By providing constant high level of voltage (16v) closer to the warranted 18volts need by performance vechicles , it helps eliminate ignition miss fire at high Rpm and power loss during high surge in voltage consumption.

30 May 2013


GrimmSpeed has announced the release of their Top Mount Intercooler. GrimmSpeed has engineered an excellent balance of heat transfer, flow, fitment and quality and with an available y-pipe upgrade and five splitter options for the 02-07 WRX and all STI fitments.


Smooth End Tank Internal Contours - Designed for maximum flow

Machined Flange Faces and Internal Bores - Maximum pressure-tightness and unrestricted flow

Machined Throttle Body Connection

Permanent Mold End Tank Tooling and Casting - Allows much tighter tolerances and higher strength

High-Density, High-Flow Core - Optimizes heat transfer and minimizes flow restriction for turbo Subaru's

Cleaned, Inspected and Sealed Prior to Shipping - Prevent Motor Damage Due To Foreign Matter Stainless Steel Threaded Inserts

Tomei Ti expreme for Hyundai Genesis

Full titanium catback exhaust for hyundai genesis 2.0

25 May 2013

Kate: bolt-on oil cooler kit for FT86/BRZ

A MUST for serious next level tunning!!!

24 May 2013


" If you are modifying 86/BRZ, "Grounding" is the most effective items.
Many makers reported that Grounding system solve torque drops at 3000 to 4000RPM"- Japan option magazine

Perrin Engine Room Wrinkled Red Garnish

* front upper strutbar wrinkled red finish
* radiator shroud ( air diversion plate) wrinkled red finish
* boost selonoid cover wrinkled red finish
* belt cover wrinkled red finish

Deatchwerks package for ft86/Brz

DeatschWerks now offers the DW65c, an upgraded 265 LPH fuel pump for the 2013 Subaru BRZ and Scion FR-S. The DW65c supports the DeatschWerks BRZ/FR-S 450cc, 700cc and 900cc injectors

DeatschWerks’ DW65c fuel pump is the only drop-in fitment aftermarket fuel pump available for the BRZ and FR-S. Together, the DW injectors and fuel pump make up a package that can boost the 200 horsepower stock BRZ/FR-S to as much as 500 hp.

The DeatschWerks BRZ/FR-S injectors and pump also fit the Toyota 86, released in Europe, Japan and elsewhere.

All DeatschWerks fuel pumps come with a quiet, reliable turbine impeller, a 3-year warranty and industry-leading tech support.


Cusco Ignition Component: *Ignition Voltage Capacitor*
* Improves engine response from low to high RPM range by supplying the ignition coil with stablized power.
* Reduces resistance to battery so is ideal for vehicles equipped with additional aftermarket electronic components.

*Direct Ignition Coil Set*
* Newly designed internal ignition coil design which produces increased spark maintained to high RPM range.
* Efficiently filters all frequency noise while keeping stable ignition to the higher revolutions.
* Promotes more eļ¬ƒcient combustion, decreasing CO & HC ppm.
* Other applications (plug & play harness) available, please inquire within.
* Direct factory replacement, no wiring or modification required.

BLITZ : FT86 Aero Speed R Concept


SEIBON Carbon Fiber Fenders: SEIBON Carbon Fiber Fenders are designed to replace your factory fenders and accept all lighting, molding and wheel wells for 100% Bolt On fitment. Cut weight in style with SEIBON Carbon Fiber Fenders.

All SEIBON Carbon Fiber Products are:

* Hand Laid
* 'Wet' Carbon Fiber
* Clear 'Gel' Coated from the Factory
* Inspected Before Shipping

23 May 2013

GReddy Performance Products highly anticipated T518Z Tuner Turbo Kit for the 2013- Scion FT 86 and Subaru BRZ!

With extensive testing, this turbo kit was designed to enhance the overall performance for daily drivers and weekend racers. An ideal turbo sizing maintains the vehicles balanced driver feel, by maintaining good low-end response with the factory engine components. But the most noticeable improvements can be noticed on the factory power-band's dip in mid-range torque and at high RPM top-end power.

GReddy dyno test showed a +93.5 whp / +68.7 ft/lbs increase at 7 psi on a stock 2013 Toyota Ft 86 with factory injectors and fuel pump, just adding a *GReddy-tuned EcuTek ecu, and a *GReddy Evo3 70mm exhaust, - (*not Included) But even more importantly, the mid-range torque from 3150-4750 RPM's are significantly improved over the stock torque curve.

The Tuner Turbo Kit includes: a top-mounted GReddy T518Z 10cm2 actuator turbo on an equal length 4-1 SUS header-type exhaust manifold with dual flex joints, SUS downpipe and cat-delete, free- flow Airinx AY-SB intake, short-routing intercooler piping, Type-40E front-mounted intercooler with cast end-tanks and all the necessary brackets, heat-shields, hoses, clamps, and gaskets.

2013 Subaru Forester : hottest upgrades!!!

INJEN Cold Air Intake kit for Forester 08-12

Injen Air Intake - SP Series Intake System: The Injen SP Series Intake Systems Feature the Patent Pending MR Technology Process for Optimal Gains and a Safe A/F Ratio. The Injen SP Series Intake System does not limit itself to just a Cold Air System or Short Ram System. The MR Technology process has its effects on both types. The Injen SP Series Intake is The World's First Tuned Intake System

Hotchkis suspension package ( FT86/BRZ)

* hotchkis lowering springs suspension
* hotchkis front anti- roll sway bar
* hotchkis rear anti-roll sway bar
* hotchkis hardened rubber swaybar supports

Skunk2 Pro Series Intake Manifold Honda B series

Skunk2 Pro-Series Intake Manifold: Skunk2 Racing’s Pro-Series Intake Manifold improves airflow thus increasing horsepower by as much as 8% over stock manifolds on stock engines and even more on modified or forced-induction engines. Skunk2 manifolds significantly increase horsepower between 3000-8800 rpm; the broadest powerband increase in the industry. Skunk2's new Pro-Series design features a 22% increase in power over our previous design.

Engineered with a larger plenum and tapered runners, Skunk2 manifolds increase and accelerate airflow, and are designed to increase the effects of wave scavenging at the engine’s optimum operating RPM range providing a broad overall increase in usable power. Each runner entry is also modified to balance airflow between cylinders. Oversized throttle bodies can be used as a result of the modified IAC opening on the flange. Like OEM factory manifolds, Skunk2 manifolds are shell molded and CNC machined, to achieve superior strength, high-quality finish, and a precise fit. Each manifold is vacuum tested to ensure quality and leakfree operation.

The Skunk2 Pro-Series manifold utilizes all stock sensors and auxiliaries for a simple bolt-on installation that delivers maximum power.

* Ideal for NA and Forced Induction
* Increased Plenum and Runner Size
* Oversized Throttle Body Opening
* Made From High-Grade 356 Aluminum
* OEM Quality Shell Molded Casting
* Nitrous Mounting Bungs
* Skunk2 Acid-Etched Nameplate
* Broadest Usable Powerband
* Vacuum Tested To Ensure Quality
* Utilizes Stock Sensors

08 May 2013


Greddy GT exhaust FT86/BRZ

Latest release : 5 zigen wheels

Made using latest flow casting method to provide light weight wheels comparable to expensive forged made wheel

05 May 2013


GRIMMSPEED OILFILLER CAP special made for Toyota FT86


Honda civic 2012-up Mugen type kit

BREMBO M Series Brake kit for FT86/ BRZ


This exhaust system comes with
• exhaust manifold
• mid pipe
• exhaust muffler

CUSCO x Bride collaboration seat series

Cusco has announced the availability of their new seats made in collaboration with premier Japanese seat manufacturer Bride. Bride is Japan's leading manufacturer of seats for general automotive, and professional racing use.

The Bride X Cusco Racing seats will be offered in very limited quantities .


Add horsepower and style under your hood with a PERRIN BRZ/FR-S Cold Air Intake. The PERRIN BRZ/FR-S intake has been designed with proper MAF alignment and tubing size to maintain proper air fuel ratios, eliminating engine bogging and preventing check engine lights. The PERRIN Performance intake system places the air filter behind the front bumper, away from the hot exhaust header and radiator to constantly draw cool fresh air and deliver 5 whp as tested by PERRIN.

Honda Civic 2012-up air intake system

aFe has released their new Takeda Retain Air intake system 2012-2013 Honda Civic 1.8L.
Features & Benefits

Tuned Intake Tube/Housing

A dyno tuned intake tube/housing is used to smoothly direct the increased airflow from the high flow filter into the engine with minimal restriction.

Retains Factory Mounting Locations

This sealed system uses the lower half of the factory air box to supply cool air from the factory air scoop.

One Piece Sealed Design

This system uses a one piece sealed design to keep hot engine air out for maximum performance

Perrin releases latest FT86/BRZ product